Stallion Ridge Exteriors (203) 990-2444
Storm damage? Report it here - send photos, get a free inspection →
Home › Siding contractors
Siding guides · Connecticut

Siding Contractors in Connecticut

Stallion Ridge Exteriors installs siding across Connecticut and in Westchester, Putnam and Dutchess Counties, New York. In Connecticut, a full re-siding needs a building permit; the state code’s exemption stops at repairs limited to 25 percent of the siding within one calendar year. Five local guides below add each area’s historic district review, housing age and the EPA lead rule for homes built before 1978.

Siding guides by area

County · 26 towns
Thirteen towns have local historic districts, an estimated 65 percent of homes predate 1980, and design wind speeds are 115 or 120 mph.
County · 27 towns
Eleven towns have local historic districts or designated properties, an estimated 69.4% of homes predate 1980, and design wind speeds are 120 or 125 mph.
County · 21 towns
Nine towns have local historic review, design wind speeds run from 125 mph to 129 mph in Stonington, and six towns have FEMA VE flood zones.
Town · New Haven County
Hamden has no local historic district, an estimated 57.9% to 68.4% of its homes were built before 1978, and new siding must be attached for 120 mph design wind loads.
Town · Litchfield County
In the Borough of Litchfield and Milton historic districts, visible siding changes need a Certificate of Appropriateness; Borough approvals in 2022, 2025 and 2026 ended with wood clapboard where vinyl had been proposed or discussed.

What every guide covers

Permits

Every town enforces the 2022 Connecticut State Building Code (CGS 29-253). Its siding permit exemption stops at the 25 percent repair limit (amended R105.2), and a contractor may not start before the permit is issued (CGS 20-427).

Historic district review

Inside a local historic district or on a locally designated property, siding changes open to view from a public street need the commission’s certificate of appropriateness “whether or not a building permit is required” (CGS 7-147d, 7-147s). Ordinary maintenance or repair that does not change appearance is exempt (CGS 7-147j), and National Register listing alone brings no commission review. Norwich’s rules say synthetic siding will not be approved as the dominant material on a historic structure.

The pre-1978 lead rule

The EPA Renovation, Repair and Painting rule (40 CFR 745) covers paid work that disturbs painted surfaces on most housing built before 1978. Its 20-square-foot exterior exclusion never covers demolition, which EPA defines as removing a painted component in a way that destroys or ruins it. The firm must be EPA-certified.

Siding we install

Vinyl, insulated vinyl, fiber cement, engineered wood and manufactured stone veneer; see our main siding page, or request an estimate.

Get a straight answer on your siding

A 3D model of your own home, full-size samples, and a 25-year workmanship warranty.

Call (203) 990-2444 Request an estimate

Common questions about siding in Connecticut

Do I need a permit to replace siding in Connecticut?

Yes, for a full re-siding. The permit exemption in the 2022 Connecticut State Building Code stops at repairs limited to 25 percent of the siding within one calendar year.

Does a historic district commission have to approve new siding?

Only inside a local historic district or on a locally designated property, where siding changes visible from a public street need a certificate of appropriateness before the building permit is issued. The guides above list which towns have them.

Does the EPA lead rule apply to re-siding an older house?

Yes, when paid work disturbs painted surfaces on a house built before 1978, unless certified testing finds no lead paint on them. The 20-square-foot small-job exclusion never covers demolition, such as tearing off painted siding in a way that ruins it.

Sources: the guides above (checked September 16–17, 2026) and the links on this page. Stallion Ridge Exteriors is a service-area business based in Bethel, Connecticut.